- Get More Information
Request a Brochure and Samples
Contact Us
86-25-84811257
86-25-84811257
86-18805179187
No.199, East Mufu Road, Gulou District, Nanjing, China.
Because the appearance quality of pipes is closely related to the raw materials and forming processes of pipes, the appearance quality of pipes is not good, and the physical and chemical properties of pipes are also poor, so the inspection of the appearance quality of pipes is quite important. In the process of production, there are roughly the following aspects: the color and lustre are inconsistent.
(1) the temperature is too high in the extrusion process, resulting in the decomposition of material and the change of color.
(2) the rotating speed of the screw is too fast or the temperature of the cylinder is low in the extrusion process, which causes the inhomogeneous plasticization and the uneven color.
(3) the friction heat of the raw material is high, which causes the material decomposition and the change of color.
(4) there is too much water or volatile matter in the raw material, and there will be a spot on the surface of the tube.
From: PPR/PP/PERT Pipe Extrusion Line
Related News
- ABS Environmental Characteristics O...
- Glass Wool Roll
- Flame Retardant Favored Causes
- Rock Wool External Thermal Insulati...
- How To Use PP Environmentally Frien...
- How To Identify Polyethylene Fire R...
- Rock Wool Board Storage Considerations
- Fire Retardant Used In Papermaking ...
- Principle Of Flame Retardant Flame ...
- The Future Development Trend Of Fla...
- What Are The Main Points Of The Fla...
- What Are The Structure And Working ...
- What Is The Process Of Foamed Plast...
- What Is The Failure Of The Pipe In ...
- Screw And Barrel Delivery Before Th...
- Waste And Old Engineering Plastics ...
- What Should You Pay Attention To Ch...
- What Is Water-ring Pelletizing?
- What Is The Extruder Screw?
- What Advantages DoesHBCD-Free Envir...